Add MKS Base 1.6 board (#16783)
This commit is contained in:
thisiskeithb
GitHub
parent
0ebd2f44d4
commit
9b4192cdd0
|
|
@ -180,88 +180,93 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1105)
|
|||
else ifeq ($(HARDWARE_MOTHERBOARD),1106)
|
||||
# MKS v1.5 with Allegro A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1107)
|
||||
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
# MKS v1.6 with Allegro A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1108)
|
||||
# MKS GEN v1.3 or 1.4
|
||||
|
||||
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1109)
|
||||
# MKS GEN L
|
||||
# MKS GEN v1.3 or 1.4
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1110)
|
||||
# zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
# MKS GEN L
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1111)
|
||||
# BigTreeTech or BIQU KFB2.0
|
||||
# zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1112)
|
||||
# Felix 2.0+ Electronics Board (RAMPS like)
|
||||
# BigTreeTech or BIQU KFB2.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1113)
|
||||
# Invent-A-Part RigidBoard
|
||||
# Felix 2.0+ Electronics Board (RAMPS like)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1114)
|
||||
# Invent-A-Part RigidBoard V2
|
||||
# Invent-A-Part RigidBoard
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1115)
|
||||
# Sainsmart 2-in-1 board
|
||||
# Invent-A-Part RigidBoard V2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1116)
|
||||
# Ultimaker
|
||||
# Sainsmart 2-in-1 board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1117)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
# Ultimaker
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1118)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
|
||||
MCU ?= atmega1280
|
||||
|
||||
# Azteeg X3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
|
||||
# Azteeg X3 Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
|
||||
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
# Azteeg X3 Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
|
||||
# Rumba
|
||||
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1122)
|
||||
# Raise3D Rumba
|
||||
# Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1123)
|
||||
# Rapide Lite RL200 Rumba
|
||||
# Raise3D Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1124)
|
||||
# Formbot T-Rex 2 Plus
|
||||
# Rapide Lite RL200 Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1125)
|
||||
# Formbot T-Rex 3
|
||||
# Formbot T-Rex 2 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1126)
|
||||
# Formbot Raptor
|
||||
# Formbot T-Rex 3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1127)
|
||||
# Formbot Raptor 2
|
||||
# Formbot Raptor
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1128)
|
||||
# bq ZUM Mega 3D
|
||||
# Formbot Raptor 2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1129)
|
||||
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
# bq ZUM Mega 3D
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1130)
|
||||
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
|
||||
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1131)
|
||||
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
|
||||
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1132)
|
||||
# TriGorilla Anycubic version 1.4 Rev 1.1
|
||||
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1133)
|
||||
# Creality: Ender-4, CR-8
|
||||
# TriGorilla Anycubic version 1.4 Rev 1.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1134)
|
||||
# Creality: CR10S, CR20, CR-X
|
||||
# Creality: Ender-4, CR-8
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1135)
|
||||
# Dagoma F5
|
||||
# Creality: CR10S, CR20, CR-X
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1136)
|
||||
# FYSETC F6
|
||||
# Dagoma F5
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1137)
|
||||
# Duplicator i3 Plus
|
||||
# FYSETC F6 1.3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1138)
|
||||
# VORON
|
||||
# FYSETC F6 1.5
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1139)
|
||||
# TRONXY V3 1.0
|
||||
# Duplicator i3 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1140)
|
||||
# Z-Bolt X Series
|
||||
# VORON
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1141)
|
||||
# TT OSCAR
|
||||
# TRONXY V3 1.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1142)
|
||||
# Overlord/Overlord Pro
|
||||
# Z-Bolt X Series
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1143)
|
||||
# ADIMLab Gantry v1
|
||||
# TT OSCAR
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1144)
|
||||
# ADIMLab Gantry v2
|
||||
# Overlord/Overlord Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1145)
|
||||
# BIQU Tango V1
|
||||
# ADIMLab Gantry v1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1146)
|
||||
# MKS GEN L V2
|
||||
# ADIMLab Gantry v2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1147)
|
||||
# BIQU Tango V1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1148)
|
||||
# MKS GEN L V2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
|
||||
|
||||
#
|
||||
# RAMBo and derivatives
|
||||
|
|
|
|||
|
|
@ -59,49 +59,50 @@
|
|||
#define BOARD_BAM_DICE 1103 // 2PrintBeta BAM&DICE with STK drivers
|
||||
#define BOARD_BAM_DICE_DUE 1104 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||
#define BOARD_MKS_BASE 1105 // MKS BASE v1.0
|
||||
#define BOARD_MKS_BASE_14 1106 // MKS v1.4 with A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_15 1107 // MKS v1.5 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_HEROIC 1108 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
#define BOARD_MKS_GEN_13 1109 // MKS GEN v1.3 or 1.4
|
||||
#define BOARD_MKS_GEN_L 1110 // MKS GEN L
|
||||
#define BOARD_KFB_2 1111 // BigTreeTech or BIQU KFB2.0
|
||||
#define BOARD_ZRIB_V20 1112 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
#define BOARD_FELIX2 1113 // Felix 2.0+ Electronics Board (RAMPS like)
|
||||
#define BOARD_RIGIDBOARD 1114 // Invent-A-Part RigidBoard
|
||||
#define BOARD_RIGIDBOARD_V2 1115 // Invent-A-Part RigidBoard V2
|
||||
#define BOARD_SAINSMART_2IN1 1116 // Sainsmart 2-in-1 board
|
||||
#define BOARD_ULTIMAKER 1117 // Ultimaker
|
||||
#define BOARD_ULTIMAKER_OLD 1118 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
#define BOARD_AZTEEG_X3 1119 // Azteeg X3
|
||||
#define BOARD_AZTEEG_X3_PRO 1120 // Azteeg X3 Pro
|
||||
#define BOARD_ULTIMAIN_2 1121 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
#define BOARD_RUMBA 1122 // Rumba
|
||||
#define BOARD_RUMBA_RAISE3D 1123 // Raise3D N series Rumba derivative
|
||||
#define BOARD_RL200 1124 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
|
||||
#define BOARD_FORMBOT_TREX2PLUS 1125 // Formbot T-Rex 2 Plus
|
||||
#define BOARD_FORMBOT_TREX3 1126 // Formbot T-Rex 3
|
||||
#define BOARD_FORMBOT_RAPTOR 1127 // Formbot Raptor
|
||||
#define BOARD_FORMBOT_RAPTOR2 1128 // Formbot Raptor 2
|
||||
#define BOARD_BQ_ZUM_MEGA_3D 1129 // bq ZUM Mega 3D
|
||||
#define BOARD_MAKEBOARD_MINI 1130 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
#define BOARD_TRIGORILLA_13 1131 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
|
||||
#define BOARD_TRIGORILLA_14 1132 // ... Ver 1.4
|
||||
#define BOARD_TRIGORILLA_14_11 1133 // ... Rev 1.1 (new servo pin order)
|
||||
#define BOARD_RAMPS_ENDER_4 1134 // Creality: Ender-4, CR-8
|
||||
#define BOARD_RAMPS_CREALITY 1135 // Creality: CR10S, CR20, CR-X
|
||||
#define BOARD_RAMPS_DAGOMA 1136 // Dagoma F5
|
||||
#define BOARD_FYSETC_F6_13 1137 // FYSETC F6 1.3
|
||||
#define BOARD_FYSETC_F6_14 1138 // FYSETC F6 1.4
|
||||
#define BOARD_DUPLICATOR_I3_PLUS 1139 // Wanhao Duplicator i3 Plus
|
||||
#define BOARD_VORON 1140 // VORON Design
|
||||
#define BOARD_TRONXY_V3_1_0 1141 // Tronxy TRONXY-V3-1.0
|
||||
#define BOARD_Z_BOLT_X_SERIES 1142 // Z-Bolt X Series
|
||||
#define BOARD_TT_OSCAR 1143 // TT OSCAR
|
||||
#define BOARD_OVERLORD 1144 // Overlord/Overlord Pro
|
||||
#define BOARD_HJC2560C_REV1 1145 // ADIMLab Gantry v1
|
||||
#define BOARD_HJC2560C_REV2 1146 // ADIMLab Gantry v2
|
||||
#define BOARD_TANGO 1147 // BIQU Tango V1
|
||||
#define BOARD_MKS_GEN_L_V2 1148 // MKS GEN L V2
|
||||
#define BOARD_MKS_BASE_14 1106 // MKS BASE v1.4 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_15 1107 // MKS BASE v1.5 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_16 1108 // MKS BASE v1.6 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_HEROIC 1109 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
#define BOARD_MKS_GEN_13 1110 // MKS GEN v1.3 or 1.4
|
||||
#define BOARD_MKS_GEN_L 1111 // MKS GEN L
|
||||
#define BOARD_KFB_2 1112 // BigTreeTech or BIQU KFB2.0
|
||||
#define BOARD_ZRIB_V20 1113 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
#define BOARD_FELIX2 1114 // Felix 2.0+ Electronics Board (RAMPS like)
|
||||
#define BOARD_RIGIDBOARD 1115 // Invent-A-Part RigidBoard
|
||||
#define BOARD_RIGIDBOARD_V2 1116 // Invent-A-Part RigidBoard V2
|
||||
#define BOARD_SAINSMART_2IN1 1117 // Sainsmart 2-in-1 board
|
||||
#define BOARD_ULTIMAKER 1118 // Ultimaker
|
||||
#define BOARD_ULTIMAKER_OLD 1119 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
#define BOARD_AZTEEG_X3 1120 // Azteeg X3
|
||||
#define BOARD_AZTEEG_X3_PRO 1121 // Azteeg X3 Pro
|
||||
#define BOARD_ULTIMAIN_2 1122 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
#define BOARD_RUMBA 1123 // Rumba
|
||||
#define BOARD_RUMBA_RAISE3D 1124 // Raise3D N series Rumba derivative
|
||||
#define BOARD_RL200 1125 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
|
||||
#define BOARD_FORMBOT_TREX2PLUS 1126 // Formbot T-Rex 2 Plus
|
||||
#define BOARD_FORMBOT_TREX3 1127 // Formbot T-Rex 3
|
||||
#define BOARD_FORMBOT_RAPTOR 1128 // Formbot Raptor
|
||||
#define BOARD_FORMBOT_RAPTOR2 1129 // Formbot Raptor 2
|
||||
#define BOARD_BQ_ZUM_MEGA_3D 1130 // bq ZUM Mega 3D
|
||||
#define BOARD_MAKEBOARD_MINI 1131 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
#define BOARD_TRIGORILLA_13 1132 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
|
||||
#define BOARD_TRIGORILLA_14 1133 // ... Ver 1.4
|
||||
#define BOARD_TRIGORILLA_14_11 1134 // ... Rev 1.1 (new servo pin order)
|
||||
#define BOARD_RAMPS_ENDER_4 1135 // Creality: Ender-4, CR-8
|
||||
#define BOARD_RAMPS_CREALITY 1136 // Creality: CR10S, CR20, CR-X
|
||||
#define BOARD_RAMPS_DAGOMA 1137 // Dagoma F5
|
||||
#define BOARD_FYSETC_F6_13 1138 // FYSETC F6 1.3
|
||||
#define BOARD_FYSETC_F6_14 1139 // FYSETC F6 1.4
|
||||
#define BOARD_DUPLICATOR_I3_PLUS 1140 // Wanhao Duplicator i3 Plus
|
||||
#define BOARD_VORON 1141 // VORON Design
|
||||
#define BOARD_TRONXY_V3_1_0 1142 // Tronxy TRONXY-V3-1.0
|
||||
#define BOARD_Z_BOLT_X_SERIES 1143 // Z-Bolt X Series
|
||||
#define BOARD_TT_OSCAR 1144 // TT OSCAR
|
||||
#define BOARD_OVERLORD 1145 // Overlord/Overlord Pro
|
||||
#define BOARD_HJC2560C_REV1 1146 // ADIMLab Gantry v1
|
||||
#define BOARD_HJC2560C_REV2 1147 // ADIMLab Gantry v2
|
||||
#define BOARD_TANGO 1148 // BIQU Tango V1
|
||||
#define BOARD_MKS_GEN_L_V2 1149 // MKS GEN L V2
|
||||
|
||||
//
|
||||
// RAMBo and derivatives
|
||||
|
|
|
|||
|
|
@ -110,6 +110,8 @@
|
|||
#include "ramps/pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
|
||||
#elif MB(MKS_BASE_15)
|
||||
#include "ramps/pins_MKS_BASE_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
|
||||
#elif MB(MKS_BASE_16)
|
||||
#include "ramps/pins_MKS_BASE_16.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
|
||||
#elif MB(MKS_BASE_HEROIC)
|
||||
#include "ramps/pins_MKS_BASE_HEROIC.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
|
||||
#elif MB(MKS_GEN_13)
|
||||
|
|
|
|||
|
|
@ -31,7 +31,9 @@
|
|||
#error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "MKS BASE 1.0"
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "MKS BASE 1.0"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@
|
|||
#pragma once
|
||||
|
||||
/**
|
||||
* MKS BASE v1.4
|
||||
* MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping
|
||||
*/
|
||||
|
||||
#if HOTENDS > 2 || E_STEPPERS > 2
|
||||
|
|
|
|||
|
|
@ -25,6 +25,12 @@
|
|||
* MKS BASE v1.5 with A4982 stepper drivers and digital micro-stepping
|
||||
*/
|
||||
|
||||
#if HOTENDS > 2 || E_STEPPERS > 2
|
||||
#error "MKS BASE 1.5 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "MKS BASE 1.5"
|
||||
|
||||
#include "pins_MKS_BASE.h"
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -0,0 +1,48 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* MKS BASE v1.6 with A4982 stepper drivers and digital micro-stepping
|
||||
*/
|
||||
|
||||
#if HOTENDS > 2 || E_STEPPERS > 2
|
||||
#error "MKS BASE 1.6 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "MKS BASE 1.6"
|
||||
|
||||
#include "pins_MKS_BASE.h"
|
||||
|
||||
/**
|
||||
* Microstepping pins
|
||||
*/
|
||||
#define X_MS1_PIN 5 // Digital 3 / Pin 5 / PE3 / SERVO2_PIN
|
||||
#define X_MS2_PIN 6 // Digital 6 / Pin 14 / PH3 / SERVO1_PIN
|
||||
#define Y_MS1_PIN 59 // Analog 5 / Pin 92 / PF5
|
||||
#define Y_MS2_PIN 58 // Analog 4 / Pin 93 / PF4
|
||||
#define Z_MS1_PIN 22 // Digital 22 / Pin 78 / PA0
|
||||
#define Z_MS2_PIN 39 // Digital 39 / Pin 70 / PG2
|
||||
#define E0_MS1_PIN 63 // Analog 9 / Pin 86 / PK1
|
||||
#define E0_MS2_PIN 64 // Analog 10 / Pin 87 / PK2
|
||||
#define E1_MS1_PIN 57 // Analog 3 / Pin 93 / PF3
|
||||
#define E1_MS2_PIN 4 // Digital 4 / Pin 1 / PG5 / SERVO3_PIN
|
||||
Loading…
Reference in New Issue