customizations for my printer
This commit is contained in:
dave
parent
4c179ba3f7
commit
c2b4ee18d8
|
|
@ -71,7 +71,7 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(DaveTech, default config)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
|
|
@ -86,7 +86,7 @@
|
|||
*/
|
||||
|
||||
// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
|
||||
#define SHOW_BOOTSCREEN
|
||||
// #define SHOW_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
|
@ -103,7 +103,7 @@
|
|||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
#define SERIAL_PORT 0
|
||||
#define SERIAL_PORT -1
|
||||
|
||||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
|
|
@ -112,7 +112,7 @@
|
|||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
#define SERIAL_PORT_2 0
|
||||
|
||||
/**
|
||||
* This setting determines the communication speed of the printer.
|
||||
|
|
@ -130,11 +130,11 @@
|
|||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_BIGTREE_SKR_V1_3
|
||||
#endif
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "Ass Machine"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like http://www.uuidgenerator.net/version4
|
||||
|
|
@ -147,7 +147,7 @@
|
|||
#define EXTRUDERS 1
|
||||
|
||||
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
||||
|
||||
// For Cyclops or any "multi-extruder" that shares a single nozzle.
|
||||
//#define SINGLENOZZLE
|
||||
|
|
@ -415,8 +415,8 @@
|
|||
#define TEMP_SENSOR_5 0
|
||||
#define TEMP_SENSOR_6 0
|
||||
#define TEMP_SENSOR_7 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
|
|
@ -451,15 +451,15 @@
|
|||
// Above this temperature the heater will be switched off.
|
||||
// This can protect components from overheating, but NOT from shorts and failures.
|
||||
// (Use MINTEMP for thermistor short/failure protection.)
|
||||
#define HEATER_0_MAXTEMP 275
|
||||
#define HEATER_1_MAXTEMP 275
|
||||
#define HEATER_2_MAXTEMP 275
|
||||
#define HEATER_3_MAXTEMP 275
|
||||
#define HEATER_4_MAXTEMP 275
|
||||
#define HEATER_5_MAXTEMP 275
|
||||
#define HEATER_6_MAXTEMP 275
|
||||
#define HEATER_7_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define HEATER_0_MAXTEMP 230
|
||||
#define HEATER_1_MAXTEMP 230
|
||||
#define HEATER_2_MAXTEMP 230
|
||||
#define HEATER_3_MAXTEMP 230
|
||||
#define HEATER_4_MAXTEMP 230
|
||||
#define HEATER_5_MAXTEMP 230
|
||||
#define HEATER_6_MAXTEMP 230
|
||||
#define HEATER_7_MAXTEMP 230
|
||||
#define BED_MAXTEMP 90
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID Settings ================================
|
||||
|
|
@ -671,15 +671,17 @@
|
|||
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
||||
*/
|
||||
//#define X_DRIVER_TYPE A4988
|
||||
//#define Y_DRIVER_TYPE A4988
|
||||
//#define Z_DRIVER_TYPE A4988
|
||||
//TMC2208
|
||||
#define X_DRIVER_TYPE TMC2208
|
||||
#define Y_DRIVER_TYPE TMC2208
|
||||
#define Z_DRIVER_TYPE TMC2208
|
||||
//#define X2_DRIVER_TYPE A4988
|
||||
//#define Y2_DRIVER_TYPE A4988
|
||||
//#define Z2_DRIVER_TYPE A4988
|
||||
//#define Z3_DRIVER_TYPE A4988
|
||||
//#define Z4_DRIVER_TYPE A4988
|
||||
//#define E0_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE TMC2208
|
||||
//#define E1_DRIVER_TYPE A4988
|
||||
//#define E2_DRIVER_TYPE A4988
|
||||
//#define E3_DRIVER_TYPE A4988
|
||||
|
|
@ -731,14 +733,17 @@
|
|||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 }
|
||||
|
||||
// Z = 2560 for old threaded rods
|
||||
// Z = 400 for the leadscrews i have
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 400, 400, 5, 45 }
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
|
|
@ -751,7 +756,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 50, 5000 }
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -766,9 +771,9 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
|
|
@ -1083,8 +1088,8 @@
|
|||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 220
|
||||
#define Y_BED_SIZE 220
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
|
|
@ -1092,7 +1097,7 @@
|
|||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define Z_MAX_POS 260
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
|
|
@ -1464,7 +1469,7 @@
|
|||
|
||||
// Preheat Constants
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_HOTEND 200
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
|
|
@ -1646,7 +1651,7 @@
|
|||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
|
|
@ -1703,7 +1708,7 @@
|
|||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
//#define REVERSE_ENCODER_DIRECTION
|
||||
#define REVERSE_ENCODER_DIRECTION
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction for navigating LCD menus.
|
||||
|
|
@ -1757,7 +1762,7 @@
|
|||
//
|
||||
// Note: Usually sold with a white PCB.
|
||||
//
|
||||
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// Original RADDS LCD Display+Encoder+SDCardReader
|
||||
|
|
|
|||
|
|
@ -1663,7 +1663,7 @@
|
|||
*
|
||||
* Override the default value based on the driver type set in Configuration.h.
|
||||
*/
|
||||
//#define MINIMUM_STEPPER_PULSE 2
|
||||
#define MINIMUM_STEPPER_PULSE 1
|
||||
|
||||
/**
|
||||
* Maximum stepping rate (in Hz) the stepper driver allows
|
||||
|
|
@ -2022,7 +2022,7 @@
|
|||
#define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
|
||||
|
||||
#if AXIS_IS_TMC(X)
|
||||
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT 600 // (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
|
||||
#define X_MICROSTEPS 16 // 0..256
|
||||
#define X_RSENSE 0.11
|
||||
|
|
@ -2030,7 +2030,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(X2)
|
||||
#define X2_CURRENT 800
|
||||
#define X2_CURRENT 600
|
||||
#define X2_CURRENT_HOME X2_CURRENT
|
||||
#define X2_MICROSTEPS 16
|
||||
#define X2_RSENSE 0.11
|
||||
|
|
@ -2038,7 +2038,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Y)
|
||||
#define Y_CURRENT 800
|
||||
#define Y_CURRENT 600
|
||||
#define Y_CURRENT_HOME Y_CURRENT
|
||||
#define Y_MICROSTEPS 16
|
||||
#define Y_RSENSE 0.11
|
||||
|
|
@ -2046,7 +2046,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Y2)
|
||||
#define Y2_CURRENT 800
|
||||
#define Y2_CURRENT 600
|
||||
#define Y2_CURRENT_HOME Y2_CURRENT
|
||||
#define Y2_MICROSTEPS 16
|
||||
#define Y2_RSENSE 0.11
|
||||
|
|
@ -2054,7 +2054,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z)
|
||||
#define Z_CURRENT 800
|
||||
#define Z_CURRENT 600
|
||||
#define Z_CURRENT_HOME Z_CURRENT
|
||||
#define Z_MICROSTEPS 16
|
||||
#define Z_RSENSE 0.11
|
||||
|
|
@ -2062,7 +2062,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z2)
|
||||
#define Z2_CURRENT 800
|
||||
#define Z2_CURRENT 600
|
||||
#define Z2_CURRENT_HOME Z2_CURRENT
|
||||
#define Z2_MICROSTEPS 16
|
||||
#define Z2_RSENSE 0.11
|
||||
|
|
@ -2070,7 +2070,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z3)
|
||||
#define Z3_CURRENT 800
|
||||
#define Z3_CURRENT 600
|
||||
#define Z3_CURRENT_HOME Z3_CURRENT
|
||||
#define Z3_MICROSTEPS 16
|
||||
#define Z3_RSENSE 0.11
|
||||
|
|
@ -2078,7 +2078,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z4)
|
||||
#define Z4_CURRENT 800
|
||||
#define Z4_CURRENT 600
|
||||
#define Z4_CURRENT_HOME Z4_CURRENT
|
||||
#define Z4_MICROSTEPS 16
|
||||
#define Z4_RSENSE 0.11
|
||||
|
|
@ -2086,56 +2086,56 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E0)
|
||||
#define E0_CURRENT 800
|
||||
#define E0_CURRENT 600
|
||||
#define E0_MICROSTEPS 16
|
||||
#define E0_RSENSE 0.11
|
||||
#define E0_CHAIN_POS -1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E1)
|
||||
#define E1_CURRENT 800
|
||||
#define E1_CURRENT 600
|
||||
#define E1_MICROSTEPS 16
|
||||
#define E1_RSENSE 0.11
|
||||
#define E1_CHAIN_POS -1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E2)
|
||||
#define E2_CURRENT 800
|
||||
#define E2_CURRENT 600
|
||||
#define E2_MICROSTEPS 16
|
||||
#define E2_RSENSE 0.11
|
||||
#define E2_CHAIN_POS -1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E3)
|
||||
#define E3_CURRENT 800
|
||||
#define E3_CURRENT 600
|
||||
#define E3_MICROSTEPS 16
|
||||
#define E3_RSENSE 0.11
|
||||
#define E3_CHAIN_POS -1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E4)
|
||||
#define E4_CURRENT 800
|
||||
#define E4_CURRENT 600
|
||||
#define E4_MICROSTEPS 16
|
||||
#define E4_RSENSE 0.11
|
||||
#define E4_CHAIN_POS -1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E5)
|
||||
#define E5_CURRENT 800
|
||||
#define E5_CURRENT 600
|
||||
#define E5_MICROSTEPS 16
|
||||
#define E5_RSENSE 0.11
|
||||
#define E5_CHAIN_POS -1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E6)
|
||||
#define E6_CURRENT 800
|
||||
#define E6_CURRENT 600
|
||||
#define E6_MICROSTEPS 16
|
||||
#define E6_RSENSE 0.11
|
||||
#define E6_CHAIN_POS -1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E7)
|
||||
#define E7_CURRENT 800
|
||||
#define E7_CURRENT 600
|
||||
#define E7_MICROSTEPS 16
|
||||
#define E7_RSENSE 0.11
|
||||
#define E7_CHAIN_POS -1
|
||||
|
|
@ -2259,24 +2259,24 @@
|
|||
* STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
|
||||
* M913 X/Y/Z/E to live tune the setting
|
||||
*/
|
||||
//#define HYBRID_THRESHOLD
|
||||
#define HYBRID_THRESHOLD
|
||||
|
||||
#define X_HYBRID_THRESHOLD 100 // [mm/s]
|
||||
#define X2_HYBRID_THRESHOLD 100
|
||||
#define Y_HYBRID_THRESHOLD 100
|
||||
#define Y2_HYBRID_THRESHOLD 100
|
||||
#define X_HYBRID_THRESHOLD 150 // [mm/s]
|
||||
#define X2_HYBRID_THRESHOLD 150
|
||||
#define Y_HYBRID_THRESHOLD 150
|
||||
#define Y2_HYBRID_THRESHOLD 150
|
||||
#define Z_HYBRID_THRESHOLD 3
|
||||
#define Z2_HYBRID_THRESHOLD 3
|
||||
#define Z3_HYBRID_THRESHOLD 3
|
||||
#define Z4_HYBRID_THRESHOLD 3
|
||||
#define E0_HYBRID_THRESHOLD 30
|
||||
#define E1_HYBRID_THRESHOLD 30
|
||||
#define E2_HYBRID_THRESHOLD 30
|
||||
#define E3_HYBRID_THRESHOLD 30
|
||||
#define E4_HYBRID_THRESHOLD 30
|
||||
#define E5_HYBRID_THRESHOLD 30
|
||||
#define E6_HYBRID_THRESHOLD 30
|
||||
#define E7_HYBRID_THRESHOLD 30
|
||||
#define E0_HYBRID_THRESHOLD 10
|
||||
#define E1_HYBRID_THRESHOLD 10
|
||||
#define E2_HYBRID_THRESHOLD 10
|
||||
#define E3_HYBRID_THRESHOLD 10
|
||||
#define E4_HYBRID_THRESHOLD 10
|
||||
#define E5_HYBRID_THRESHOLD 10
|
||||
#define E6_HYBRID_THRESHOLD 10
|
||||
#define E7_HYBRID_THRESHOLD 10
|
||||
|
||||
/**
|
||||
* Use StallGuard2 to home / probe X, Y, Z.
|
||||
|
|
@ -2331,7 +2331,7 @@
|
|||
* Enable M122 debugging command for TMC stepper drivers.
|
||||
* M122 S0/1 will enable continous reporting.
|
||||
*/
|
||||
//#define TMC_DEBUG
|
||||
#define TMC_DEBUG
|
||||
|
||||
/**
|
||||
* You can set your own advanced settings by filling in predefined functions.
|
||||
|
|
|
|||
Loading…
Reference in New Issue